Quik-Shot Systems and Accessories

 

DSC_4553

Quik-Shot Inversion Unit

This is the most advanced lateral lining system available. Lightweight and portable and yet can continuous feed to any length.  Basic unit equipped to invert both 4” and 6”. Compatible with any and all manufacturer’s lining materials. The Unit uses air to invert the lining material but is equipped with a water port if water inversion is desired.

quiklining2

Quik-Shot Kits

Quik-Shot unit has kits available for either 3” and 8” liners. Kit includes, nozzle, bats, stiffener and gasket.

  • 3” Kit
  • 8” Kit
DSC_4690

Air Control Plug

Air manifold regulator control to be used when air curing.

DSC_4669

Calibration Hand Roller

Calibration Hand Roller on a foldable stand. Has a calibration scale on unit to insure the proper amount of resin in every liner. Stands approximately 54 in x 30 in wide. Designed so it can be used as a standalone or truck mounted.

mixing_bit

Mixing Bit

Mixing bit to put in 1/2″ drill to mix the resin correctly.

digital_scale

Digital Scale

Digital scale with case.

To measure correct amount of resin and hardener.

vacuum_pump

Vacuum Pump

Special vacuum pump that connects to your compressor.  Available in 2 sizes.  The small vacuum has max flow of  2.2 cfm.  The large vacuum has a flow of 27 cfm.

domeHead

Dome Head Manifold

The Domeheld Manifold connects on the Quik-Shot nozzle for either heat cure or air cure.

Top