Material & Resin

Our goal is to serve the industry with a complete warehouse stocked with the best
products at the lowest delivered cost on a timely basis. Many types of liners and resins
designed for your individual job. Material for straight lines, lines with 90’s or 45’s, or
lines that change in diameter. Resins that satisfy the agency requirements and that
have different working times depending on your job.

Pipe Lining Supply stocks a complete line of resins and lining materials for all your lateral lining needs. Available for customer pick-up or will ship out same day.

Resins Stocked in Base, 15, 30 & 60 Minute Hardeners
Epoxy Resin 
Quik-Pox™ epoxy resin specially designed for the lateral lining business.  Detailed product information, Spec sheets, MSDS, and mixing instructions located on
Vinyl Ester Resin
CORVE 8190 Vinyl Ester resin combined with our AF felt liner meets the Greenbook requirement for the City of Los Angeles. Available in 5 gallon pails of 40 lbs. each, and is activated with the Perk catalyst listed below. This resin system is very easy to use.
Polyester Resin


Quik PE Polyester Resin is an economical resin option.  Polyester resin has been used in the lining business for years. It is a styrene based resin that is activated with a Perk catalyst listed below.  Available in 5 gal pails or 40 lbs each or 55 gal drums.
The Perkadox catalyst is sold in small pre-measured containers that are packaged 16 per case. This fine powder easily mixes with either the Vinyl Ester Resin or the Polyester Resin to facilitate a consistent and uniform cure.

3”, 4”, 5”, 6”, 8”, 10” & 12”

Felt Liner with Scrim

Felt Liner Tube with polyester scrim has a PVC coating. This tube is characterized by its simple and thorough soaking ability and is ideally suited for straight lines for both residential and light commercial lines.Available in 3mm or 4.5mm thickness.

Flex Liner in 4″ & 6″ only.
Flex Liner
This consists of felt tube with a PVC coating.  The triple stitch insures easy saturation at the seam. Can negotiate 45 degree bends with just a slight fold.

2”, 3” 4” & 5”
Super Flex Thin
Super Flex Thin Liner is a very flexible liner that has a cross stitched seam. Super Flex Liner has a PVC coating and negotiates bends up to 90 degree sweeps with minimal wrinkling. Super Flex Liner is 2.5mm thick.

3”, 4”, 5”, 6”, 8”, 10” & 12”
Super Flex Thick
Super Flex Thick Liner is a very flexible liner that has a cross stitched seam. Super Flex Liner has a PVC coating and negotiates bends up to 90 degree sweeps with minimal wrinkling. Super Flex Liner is 4.5mm thick.
Transition Liner Transition Liner A 4 in. x 6 in. transition liner is made with the Felt Liner with Scrim. The liner is made up of 50 ft. of 4 in. liner, 3 ft. of a taper and 50 ft. of 6 in. liner. This liner is used when the line changes from 4 in. to 6 in.pipe.

3”, 4”, 5” & 6”
Superlite Calibration Tube

Superlite Calibration TubeThis is green in color. Light weight polyester fabric with PVC coating with an overlapped and taped joint.

4”, 6”, 8”, 10” & 12”
High Temp Calibration Tube
The orange high temp calibration hose is designed to tolerate temps up to 180 degree. It is made from a medium weight polyester fabric with PVC coating and is very tough. Perfect product to use with the boiler when heat curing.

Pre-Liner in 4” or 6”
Pre-Liner is a poly tubing with fiberglass reinforcement. Used when existing sewer line has pipe missing and/or water is infiltrating into your line.

Fiberglass Matting
for Point Repairs
Fiberglass Matting

Fiberglass MattingFiberglass matting is a bi-ply fiberglass composed of woven roving and chopped roving stitch-bonded into one fabric.  This fabric can be used with a packer to do spot repairs.

Part A & Part B, a 1:1 resin mix used in the Quik Coating Maching

Poly Urea Resin for Coating Process