calibration

Materials & Resins

Materials & Resins

Our goal is to serve the industry with a complete warehouse stocked with the best products at the lowest delivered cost on a timely basis. Many types of liners are designed for your individual job. Material for straight lines, lines with 90’s or 45’s, or lines that change in diameter. Resins that satisfy the agency […]

Read More →

Calibration Tube

Calibration Tube

Pipe Lining Supply stocks a complete line of calibration tube and lining materials for all your lateral lining needs. Available for customer pick-up or will ship out same day. 3”, 4”, 5” & 6” Superlite Calibration Tube Superlite Calibration TubeThis is green in color. Light weight polyester fabric with PVC coating with an overlapped and […]

Read More →

Resin

Resin

Our goal is to serve the industry with a complete warehouse stocked with the best products at the lowest delivered cost on a timely basis. Many types of resins designed for your individual job.  Resins that satisfy the agency requirements and that have different working times depending on your job. Pipe Lining Supply stocks a […]

Read More →

Quik-Coating Systems

Quik-Coating Systems

Quik-Coating System The Quik-Coating System is designed for the rehabilitation of drain, waste and vent piping 1.5” thru 6”*. The accessory kit includes a shop vac with additional 24 ft of hose, extra quick connect fittings, scale, lithium grease, tape, safety glasses, latex gloves, and remote control. Process has IAPMO approval and follows UPC Resin […]

Read More →

Electric Roller Bed

Electric Roller Bed

Electric Roller Bed Add On Many of you requested an electric drive for our manual roller. For those of you who used other pinch calibration rollers and switched to our Quik Roller you know the precision the roller employs. Unlike many other rollers that drive only one roller and jams in the stationary roller during […]

Read More →

Approvals & Standards – Are They End Game or Path Markers?

Approvals & Standards – Are They End Game or Path Markers?

“I’ve been installing liners for a while now and ran into an engineer who insists I provide all documentation showing that the material have approvals from an independent agency for the resin and tube to the thickness specified for his job. Do you have testing samples approved for 3mm as well as 4.5mm and with […]

Read More →

Some Updates

Some Updates

A few weeks ago we introduced SLIC Lubricant ™ to the CIPP marketplace. Your response has been great. Many of you have tested it and have subsequently ordered the product to eliminate the cleanup issues you were getting from oils, and from the drying out too early from the dish washing liquid. If you haven’t […]

Read More →

Protected: PLS Customer Area

Protected: PLS Customer Area

There is no excerpt because this is a protected post.

Read More →

Misc. Equipment

Misc. Equipment

Inversion Heads Inversion Heads Inversion 90’s for 3”, 4” and 6” Special order in 45 degrees & straight angels. 6” Male Cap Air Cap to hold correct amount of pressure during cure. Attaches to inversion heads. Thermometer Thermometer is a great way to get resin temperature readings during the cure process. Used to gauge accurate […]

Read More →

Support & Training

Support & Training

  Our staff has many years of plumbing, excavating, pipe bursting and CIPP lining experience to share with its clients. This knowledge is transferred through training offerings, phone support and job assistance as needed. We offer a complete scope of training with any type of inversion system or pull-in-place systems. We also offer on the […]

Read More →

Top
close

Enjoy this blog? Please like us on Facebook!!