English
Spanishpipe bursting
One Solution Doesn’t Fit All Jobs
“I have a job that the pipe is virtually collapsed and I’d like to line the pipe. I can’t get a camera through the collapse but thought I’d try to blow a liner through the line and open the collapsed pipe open, hold pressure on the liner and restore the line. My question is how […]
Approvals & Testing Results
Pipe Lining Supply, Corp. has received confirmation from ICC Evaluation Service, LLC (ICC-ES), that its Quik-Coating System complies with the provisions of the codes listed below. This confirmation, as evidence in ICC-ES evaluation report PMG-1485, provides guidance to code officials faced with approving the use of Quik-Coating System under these codes. The evaluation report is […]
SLIC Lube
DESIGNED FOR LUBRICATING ALL CIPP LINING MATERIALS AND CPP CALIBRATION TUBES Quit spending more time cleaning up vegetable oil stains than lining pipe. If you are leaving a job smelling like a fast food French fry, there is a cure. A product formulated for the Cured In Place Pipe (CIPP) industry that lubricates the coating […]
Quik-Shot™ Systems
Quik-Shot™ System This is the most advanced lateral lining system available. Lightweight and portable and yet can continuous feed to any length. Basic unit equipped to invert both 4” and 6”. Compatible with any and all manufacturer’s lining materials. The Quik-Shot™ Unit uses air to invert the lining material but is equipped with a water port […]
Lateral Lining
Pipe Lining Supply offers lateral sewer lining system that will increase your capacity to line pipe without increasing your fleet of trucks and trailers. The Quik-Shot™ system fits into small spaces but is able to process a lot of liner in a short amount of time. We can go from the “wet out” calibration process […]
Materials & Resins
Our goal is to serve the industry with a complete warehouse stocked with the best products at the lowest delivered cost on a timely basis. Many types of liners are designed for your individual job. Material for straight lines, lines with 90’s or 45’s, or lines that change in diameter. Resins that satisfy the agency […]
Calibration Tube
Pipe Lining Supply stocks a complete line of calibration tube and lining materials for all your lateral lining needs. Available for customer pick-up or will ship out same day. 3″ Yellow Calibration Tube HF Heavy duty polyester fabric with high frequency (HF) welded overlap. Ideal for Inversion or “Pull in Place” Method. 4”, 5” & […]
Resin
Our goal is to serve the industry with a complete warehouse stocked with the best products at the lowest delivered cost on a timely basis. Many types of resins designed for your individual job. Resins that satisfy the agency requirements and that have different working times depending on your job. Pipe Lining Supply stocks a […]
Quik-Coating Systems
Quik-Coating System The Quik-Coating System is designed for the rehabilitation of drain, waste and vent piping 1.5” thru 6”*. The accessory kit includes a shop vac with additional 24 ft of hose, extra quick connect fittings, scale, lithium grease, tape, safety glasses, latex gloves, and remote control. Process has IAPMO approval and follows UPC Resin […]
Connect