pipe lining supply

Inversion Tank Maintenance Issues

Inversion Tank Maintenance Issues

“Did you change your liner material? I’ve been using your lining material and resin for several years and the past 4 jobs have been a real pain to get the material to invert. We’ve taken the pressure up to the maximum allowed in the tank and found that we’ve had to shake the tank and […]

Read More →

Annulus Space & CIPP lining

Annulus Space & CIPP lining

“Why are my liners pulling away from the wall of the host pipe? I know you’ve said that the liner can be designed to be stand alone and I’m not worried that it’s strong enough to stand up, but what about tie-ins and water tracking? Will the roots we’ve tried to eliminate find a path […]

Read More →

Inflow & Infiltration – What’s the difference?

Inflow & Infiltration – What’s the difference?

“I keep hearing about I/I and wondered what people were talking about? I asked someone and they said that it stood for infiltration and inflow of water into a sewer pipe and it wasn’t a good thing but they didn’t know why. What exactly is the difference between the two and why is it not […]

Read More →

Press Release: Product Improvement

Press Release: Product Improvement

Pipe Lining Supply’s Introduction to a MAJOR PRODUCT Improvement – New Nozzle  with the Quik-Shot™ System January 2019 – Pipe Lining Supply is launching their new line of nozzles for the Quik-Shot™ System. The new nozzles improve the inversion process by reducing friction at the nozzle head. This change will allow the liner to invert easier than […]

Read More →

Roots Growing Through CIPP Liner?

Roots Growing Through CIPP Liner?

Have you ever experienced a root growing through a CIPP liner? I have and while it’s considered a failure, it is a great teaching moment. So how did it happen? My wet out and installation crew was fully seasoned. They’d installed over 1,000,000 feet of CIPP liner, yet here was a root growing through an […]

Read More →

Pipe Lining Supply – Holiday Hours

Pipe Lining Supply – Holiday Hours

Read More →

ONLINE Resin Demand Calculator – Now Available!

ONLINE Resin Demand Calculator – Now Available!

“I’ve tried several ‘on line’ programs to calculate the amount of resin I need for a job. All of them are asking for details that I either don’t have or don’t know. I understand the math of multiplying the resin pounds per foot of the material size you are using and getting the resin and […]

Read More →

Electric Roller Bed

Electric Roller Bed

Electric Roller Bed Add On Many of you requested an electric drive for our manual roller. For those of you who used other pinch calibration rollers and switched to our Quik Roller you know the precision the roller employs. Unlike many other rollers that drive only one roller and jams in the stationary roller during […]

Read More →

What’s the Best Vehicle to Use for your JOB??

What’s the Best Vehicle to Use for your JOB??

The 4 Vehicles above are the most common vehicles used to perform field installation of CIPP lateral lines. That said, any vehicle that gets you to the field, with all of the materials and equipment you need to perform the job, and return again, are acceptable vehicles. So, why would you choose one over the […]

Read More →

Top
close

Enjoy this blog? Please like us on Facebook!!