August, 2019
Curing the Liner
Best Practices – 10th in the Series Ambient & Heat Cure When it’s time to cure the CIPP liner we have 3 methods that are proven and tested and a 4th one that is emerging. We will explore the ambient and heat cure methods. With any of these systems, we want to stretch the liner […]
Certification/Demo Class
Pipe Lining Supply is pleased to offer a Certification/Demo Class on Oct. 10, in Cold Spring, NY. Register NOW to reserve your spot! https://pipeliningsupply.com/registration/
Installing the Liner & Calibration Tube
Best Practices – 9th in the series Our next best practice is the method of getting the liner into the host pipe that we are using as a form for the new pipe. Remember we are calculating a design thickness that will serve as a stand-alone pipe, so the condition of the host pipe is […]
Wet-Out & Calibration
Best Practices – 8th in the series This section will cover the choice of resin, measuring, mixing and “wet-out” of the calibration tube. We have three resin choices, Polyester, Vinyl Ester and Epoxy resin. While all three resins are acceptable for use according to ASTM F-1216 or ASTM F-1743, local agency codes may dictate which […]
CIPP Installation – Preparation of Liner, Calibration Tube, & Pull Strap
Best Practices – 7th in the series This step picks up where we left off with our CCTV cable “storyboard” to prepare the liner. Here are the steps to measure, mark and cut your tube. Layout the CCTV camera Unroll and stretch the liner tube and place beside your CCTV cable On the camera end, […]
Connect