Quik-Pox™ Resin

Quik-Pox™ Resin and Hardener System

DIFFERENT WORKING TIMES FOR DIFFERENT JOBS!

  • Three hardeners to meet your needs.
  • Different working times and cure times.
  • Compatible with all lining systems.
  • It surpasses ASTM requirements.
  • Available in small or large orders.
  • Same-day shipping.
  • Competitively priced!

Quik-Pox™ Resins and Hardner System

Quik-Pox™ Epoxy Resin Pot Life time (approx.) in Minutes

The following chart gives the working time of combination. It is calculated on the temperature of the resin – not air temp.
Quik-Pox Base Resin – (4 parts) with: 50°F 63°F 77°F 80°F
Quik-Pox 15 Hardener (1 part) 35 Min. 20 Min. 15 Min. 10 Min.

Quik-Pox™ Epoxy Resin Initial Curing Time (approx.)

The following chart gives the approximate curing time of resin combination. It is calculated on the ground temperature - not air temp.
Quik-Pox Base Resin – (4 parts) with: 58°F 63°F 77°F 80°F 96°F 125°F
Quik-Pox 15 Hardener (1part) 5 Hrs. 3 Hrs. 2 Hrs. 1.5 Hrs. 50 Min. 18 Min.
Note: Ground Temp below frost line (4-5 ft. deep) is approx. 55°

Quik-Pox™ Epoxy Resin Pot Life time (approx.) in Minutes

The following chart gives the working time of combination. It is calculated on the temperature of the resin – not air temp.
Quik-Pox Base Resin – (4 parts) with: 50°F 63°F 77°F 80°F
Quik-Pox 30 Hardener (1 part) 120 Min. 50 Min. 30 Min. 20 Min.

Quik-Pox™ Epoxy Resin Initial Curing Time (approx.)

The following chart gives the approximate curing time of resin combination. It is calculated on the ground temperature - not air temp.
Quik-Pox Base Resin – (4 parts) with: 58°F 63°F 77°F 80°F 96°F 125°F
Quik-Pox 30 Hardener (1part) 7 Hrs. 4 Hrs. 3 Hrs. 2.5 Hrs. 85 Min. 28 Min.
Note: Ground Temp below frost line (4-5 ft. deep) is approx. 55°

Quik-Pox™ Epoxy Resin Pot Life time (approx.) in Minutes

The following chart gives the working time of combination. It is calculated on the temperature of the resin – not air temp.
Quik-Pox Base Resin – (4 parts) with: 50°F 63°F 77°F 80°F
Quik-Pox 60 Hardener (1 part) 180 Min. 100 Min. 60 Min. 30 Min.

Quik-Pox™ Epoxy Resin Initial Curing Time (approx.)

The following chart gives the approximate curing time of resin combination. It is calculated on the ground temperature - not air temp.
Quik-Pox Base Resin – (4 parts) with: 58°F 63°F 77°F 80°F 96°F 125°F
Quik-Pox 60 Hardener (1part) 11 Hrs. 6 Hrs. 5 Hrs. 4.5 Hrs. 135 Min. 45 Min.
Note: Ground Temp below frost line (4-5 ft. deep) is approx. 55°

Quik-Pox™ Resin Base

Quik-Pox is a 100% solid epoxy that contains no solvents. Highly resistant to crystallization in cold environments. With a viscosity of over 1450 cps, the resin will not run off the liner tube. A blue tint has been added to the resin to make it easier to verify the total impregnation of a liner tube. Odor-free & D.O.T. non-regulated.

Required Quantities for Mixed Resin

Diameter & Thickness
Pounds of Resin Required Per Foot of Liner
2” x 2.5 mm
0.4
3” x 4.5 mm
0.6
4” x 3 mm
0.7
4” x 4.5 mm
0.8
4” x 5 mm
0.8
5” x 4.5 mm
1.0
6” x 3 mm
1.0
6” x 4.5 mm
1.2
6” x 5 mm
1.5
8” x 4.5 mm
1.6
8” x 5 mm
2.0
8” x 6 mm
2.4
 

* 160 Minute Cure Time Available


Quik-Pox™ Resin and hardener systems have been developed for the lateral lining business by a custom formulator that has been assisting clients with epoxy systems for over 15 years. Careful consideration has been taken to ensure that the final product meets and exceeds all the ASTM requirements for the CIPP (Cured in Place Pipe) market.

The lateral lining business has special needs. The need for an ambient cure resin that works in all climates and for a variety of different types of jobs. The possibility of heat curing a job is also necessary for some jobs. The Quik-Pox™ Resin was designed to meet all these needs.

Top