Companion Tools & Cutters


Cables – TOP Seller!!

Ready to use cable and cover with T-slide adapters.

• 5/16” cable x 30 feet long
• 5/16” cable x 60 feet long
• 3/8” cable x 30 feet long
• 3/8” cable x 60 feet long
• 1⁄2” cable X 15 feet long
• 1⁄2” cable x 100 feet long
• Other lengths available for special order.


Adjustable Clutch

The clutch is used as an accessory for a drill when rotating a cable with a chain knocker on it. The clutch prevents the cable of breaking down and personal injuries, if the tool gets stuck in the pipe while rotating. Does not include drill.

• Clutch for a drill Includes sleeves for 5/16”, 3/8” and 1⁄2” cables.
• Also includes clutch keys.
• T-slide adapter, male
• Clutch rotator sleeve


Centering Axels

Centering Axles are used to centralize different tools to get the best result for your job. Can be used with cutters and collapse line drill. Centering Axle has high quality ball bearings inside to make it rotate well.

  • For 2 inch lines
  • For 3 inch lines
  • For 4 inch lines
  • For 6 inch lines

Cable Connectors

Cable connectors can connect centering axle or another cable to your cable.

  • For 2 inch or 3 inch centering axle
  • For 4 inch centering axle
  • For 6 inch centering axle

Collapse Line Drill

Use with centering Axles to open a collapsed line or a line that has a complete blockage.

  • For 2 inch lines
  • For 4 inch lines

Cutters

Cutters are used in different operations of relining process. Example: Opening a lateral connection after lining. Use with Centering Axles.

  • For 2 inch lines
  • For 3 inch lines
  • For 4 inch lines
  • For 6 inch lines

Chain Knockers – Won’t Disappoint!!

Chain knockers clean effectively the rust and the dirs. From the pipe before lining.

  • For 2” lines use on 8, 10 or 12mm cable
  • For 3” lines use on 8, 10 or 12mm cable
  • For 4” lines use on 8, 10 or 12mm cable
  • For 6” lines use on 8, 10 or 12mm cable
  • For 8” lines use on 12mm cable

Chain Knockers on a T slide

  • For 4 inch lines on a 16 mm T-slide
  • For 6 inch lines on a 16 mm T-slide

Sandpaper Holder

Sandpaper Holders connect to a cable and hold 4 sandpapers. Available for 2 inch wide sandpaper and 4 inch wide sandpaper. Use this with different length sandpaper depending on the size line.

Sandpaper
  • For 4 inch wide sandpapers, uses 4 papers
  • For 2 inch wide sandpapers, 4 uses papers

Sandpapers

  • 4 inch wide x 4 inch long
  • 4 inch wide x 6 inch long
  • 2 inch wide x 3 inch long
  • 2 inch wide x 4 inch long
  • 2 inch wide x 6 inch long

Top