#DWV

How Do I Keep My Coating Brushes Clean?

How Do I Keep My Coating Brushes Clean?

“I’ve begun using your coating process but am having a hard time keeping my brushes clean. After each coat I’ve dipped the brushes in the Acetone and then the brush cleaner but am seeing a build up of resin on the brushes. I spray the brushes once at the beginning of my first run and […]

Read More →

CIPP Solutions for Tie-Ins

CIPP Solutions for Tie-Ins

Many of you perform work inside buildings where many branch lines have tied in to a line your were lining with CIPP materials we supplied you. This past year we introduced the Quik-Coating Process which allows you to coat Drain, Waste and Vent (DWV) piping without the worry of opening branch lines or having opened […]

Read More →

Quik-Coating Presentation at WWETT Show…

Quik-Coating Presentation at WWETT Show…

For those of you still evaluating coating of drain, waste and vent (DWV) piping as well as other conduits, John Heisler from Pipe Lining Supply will present information on the coating process. The presentation will include the methods of application used for the process, the tooling needed to apply the product, some case histories, and […]

Read More →

Poly Urea Coating Process – IT WORKS!

Poly Urea Coating Process – IT WORKS!

“You haven’t talked about the coating process lately. Any problems with the process we need to know about? I’ve heard that some of the processes are too time consuming to make any production levels feasible.” There are several competitive processes out in the market place that use a variety of resins and are applied with […]

Read More →

Quik-Coating Resin Mixing

Quik-Coating Resin Mixing

“A competitor told me that your coating system can’t work as it does not employ a static mixer to mix the 2 parts of resin. He also said there would be no reason to weigh the resin before application and after as the resin is pre-mixed before applying. Do you have an answer or is […]

Read More →

Updates on the Quik-Coating Process

Updates on the Quik-Coating Process

As Described In AIPPR IGC-351-18 With our Quik Coating process that launched in December of this past year, we’ve armed many new and existing customers with a tool in their toolbox to rehabilitate drain, waste and vent pipe. Many have embraced the technology and have grown their businesses with the process adding multiple units to […]

Read More →

COATING PICTURES FROM AROUND THE WORLD

COATING PICTURES FROM AROUND THE WORLD

Here are some photos of coating projects that span the world from Hawaii to Switzerland and many places in between. We’ve trained customers to apply a permanent fix to corrosion and rebuild drain, waste and vent piping to a better than new condition. Enjoy the photos and for more information call Pipe Lining Supply 888-354-6464.

Read More →

One & Done? Coating With One Pass & Structurally Sound?

One & Done? Coating With One Pass & Structurally Sound?

” I was told at the WWETT Show that a competitive process to your coating system could apply a single layer of resin to a pipe and it would be a stand alone structural liner. With your system, you need to build up layers to get to a design thickness to rebuild pipe to structural. […]

Read More →

Pipe Lining Supply – HOME

Your Cured-In-Place Pipe Lateral Lining (CIPP) & Pipe Coating your Drain, Waste & Vent (DWV) Pipe Rehabilitation Supplier. Call Today! 1-888-354-6464 “Restoring your PIPES to a like new condition adding 50+ years without digging”

Read More →

Top