pvc
Branch Line Tie-Ins Cause Problems
“I just got a call back from a lining job I completed using a pull in place method. I followed the gapping method of cutting out an oversized section of the liner to avoid cutting out the branch lines. Everything went in as planned and I was proud of providing a permanent solution only to […]
Welding/Gluing Calibration Tube To Lining Materials
“We were at one of your training sessions and saw you weld a section of green calibration tube to the coating on your lining material and then invert it into the pipe. You used a flat iron to weld the two together, then inverted it to start liner after the turn of a combi. We […]
Special Resin For PVC Pipe vs. Other Pipe
“My supplier told me I had to use a special epoxy resin to line PVC pipe. Is there different resin formulations for different types of host pipe material or is this guy blowing smoke?” Either your supplier is mistaken in their understanding or they are indeed blowing smoke but there is no resin formulations that […]
Function vs. Features
“I bought one of your competitors’ coating machines after looking at both units. Your competitors machine was $50,000 more money than yours and they told me I needed all of the bells and whistles they featured such as automatic retrieval of the spray head, a computer to tell me how many grams per cm of […]
Trouble Shooting
Best Practices – 11th in the Series Trouble Shooting– CIPP Lining Lining & Calibration Material HOLE IN LINING OR CALIBRATION MATERIAL Patch materials include Tear-Aid ™ product to cover the hole or welding on a patch. The product contains an adhesive in two versions. One for PVC coatings and one for all other plastic coatings. […]
Connect