lateral lining

CIPP Liner Overshot Fixes

CIPP Liner Overshot Fixes

“I shot a liner too long and it ended up 4” in the sewer main in the street. I figured it would be okay as it bulged out when it got to the main being unstrained by the host pipe and thought ‘great, I’m insuring no roots from growing into the joint where it connects […]

Read More →

One Solution Doesn’t Fit All Jobs

One Solution Doesn’t Fit All Jobs

“I have a job that the pipe is virtually collapsed and I’d like to line the pipe. I can’t get a camera through the collapse but thought I’d try to blow a liner through the line and open the collapsed pipe open, hold pressure on the liner and restore the line. My question is how […]

Read More →

Companion Tools & Cutters

Companion Tools & Cutters

Cables – TOP Seller!! Ready to use cable and cover with T-slide adapters. • 5/16” cable x 30 feet long • 5/16” cable x 60 feet long • 3/8” cable x 30 feet long • 3/8” cable x 60 feet long • 1⁄2” cable X 15 feet long • 1⁄2” cable x 100 feet long […]

Read More →

Pipe Lining Supply Celebrates Its 15th Anniversary

Pipe Lining Supply Celebrates Its 15th Anniversary

May 1, 2019: Pipe Lining Supply announces its 15th anniversary as a nationwide, full-service, Pipe Rehabilitation Distributor. Pipe Lining Supply (PLS) was founded on January 1, 2004 by Linda Heisler. Her primary focus was the CIPP industry in the California area. She saw a need to service customers with reasonably priced materials and great customer […]

Read More →

IAPMO Ban of CIPP In Cast Iron Pipe

IAPMO Ban of CIPP In Cast Iron Pipe

I attended the annual code committee meeting in Denver, CO this week (April 29-30, 2019). Our industry, CIPP lining, has been under attack by the Cast Iron Pipe Industry. They were successful in outlawing the use of CIPP in cast iron pipe last year and the contractors and suppliers have joined forces to convince IAPMO […]

Read More →

Managing A Long Liner & Resin (309′ x 8″ Diameter)

Managing A Long Liner & Resin (309′ x 8″ Diameter)

This past week, a brand new customer had a 309’ by 8” diameter pipe to line. It was spec’d out to be epoxy and served a school drain in central Missouri. The pipe needed extensive cleaning and leaked and the school district wanted the pipe repaired for health safety reasons. The resin demand for this […]

Read More →

Shooting Long Liners With The Quik-Shot™

Shooting Long Liners With The Quik-Shot™

“I’ve got a 12” CIPP liner to install but your Quik-Shot™ unit only goes to 8”. Do you have a bigger unit I can rent for this single shot? I don’t really want to invest in a unit for a single shot.” Being faced with a similar job years ago when I was contracting for […]

Read More →

Approvals & Testing Results

Approvals & Testing Results

Pipe Lining Supply, Corp. has received confirmation from ICC Evaluation Service, LLC (ICC-ES), that its Quik-Coating System complies with the provisions of the codes listed below. This confirmation, as evidence in ICC-ES evaluation report PMG-1485, provides guidance to code officials faced with approving the use of Quik-Coating System under these codes. The evaluation report is […]

Read More →

Inversion Tank Maintenance Issues

Inversion Tank Maintenance Issues

“Did you change your liner material? I’ve been using your lining material and resin for several years and the past 4 jobs have been a real pain to get the material to invert. We’ve taken the pressure up to the maximum allowed in the tank and found that we’ve had to shake the tank and […]

Read More →

SLIC Lube

SLIC Lube

DESIGNED FOR LUBRICATING ALL CIPP LINING MATERIALS AND CPP CALIBRATION TUBES Quit spending more time cleaning up vegetable oil stains than lining pipe. If you are leaving a job smelling like a fast food French fry, there is a cure. A product formulated for the Cured In Place Pipe (CIPP) industry that lubricates the coating […]

Read More →

Top