blog

Tip: Planning

Tip: Planning

90% of a job’s success is in the planning, and 10% is in the execution. If you fail to plan out your job, you are planning to fail. This applies to Lateral Lining and Pipe coating jobs as well as life. For more information contact Pipe Lining Supply at +1-888-354-6464 or email us at info@pipeliningsupply.com.

Read More →

Tip: Warranties

Tip: Warranties

Warranties are usually only as good as the paper they are written on. The only enforceable warranties are those that are backed by a surety bond.  They are issued by an independent bonding company who will pay for losses repaired by anyone after they, not the original vendor, approve the repair. If you receive a […]

Read More →

Tip: Weighing Cubetainers

Tip: Weighing Cubetainers

When applying a coating to DWV pipe, weigh the Cubetainers before applying the polyurea resin. Record the amount you calculated for that segment of pipe and record the beginning weight of the Cubetainers together. Apply as many coats as you think you need, then weight the Cubetainers after. If you meet or exceed the amount […]

Read More →

Tip: Competing In the Marketplace

Tip: Competing In the Marketplace

To be successful in competing in your markets, you will always edge out your competitor if you know more than they do and can demonstrate that expertise to your prospects. KNOWLEDGE IS POWER! For more information contact Pipe Lining Supply at +1-888-354-6464 or email us at info@pipeliningsupply.com.

Read More →

Tip: Using a High-Speed Cable

Tip: Using a High-Speed Cable

Tip: When using a high-speed cable, cover any exposed metal cable with short sections of the sheathing. This will help prevent the cable from kinking when it gets locked up in a root. For more information contact Pipe Lining Supply at +1-888-354-6464 or email us at info@pipeliningsupply.com.

Read More →

Tip: Curing CIPP

Tip: Curing CIPP

How you accelerate the curing of CIPP lateral liners varies. Whether it’s hot water, steam, UV, or some other method – there are other considerations than time. Equipment costs, ease of use, and portability need to be weighed before selecting which one works best for you. For more information contact Pipe Lining Supply at +1-888-354-6464 […]

Read More →

Pipe Coating System from Pipe Lining Supply

Pipe Coating System from Pipe Lining Supply

The Quik-Coating System by Pipe Lining Supply is the industry’s BEST choice for coating sewer pipe. Our system has a 5-Minute DRY TIME!! If you have a drain, waste, or vent piping that needs to be restored to a LIKE NEW condition, give us a call to learn more! 1-888-354-6464

Read More →

Tip: Explaining to Customers

Tip: Explaining to Customers

Explaining sewer and DWV problems to your customer will gain you more work than any other advertising of lining or coating capabilities will do. Pipe Lining Supply offers a brochure to give to your customers to help with the questions and options the end-user may have. For more information contact Pipe Lining Supply at +1-888-354-6464 […]

Read More →

Tip: Vacuuming Out Air Pockets When Wetting Out

Tip: Vacuuming Out Air Pockets When Wetting Out

Vacuuming a CIPP lateral liner eliminates entrained air from a liner tube. Lack of vacuum impregnation will leave dry spots that allow roots to penetrate over time where no resin is present. It also meets the ASTM standards for CIPP lining. For more information contact Pipe Lining Supply at +1-888-354-6464 or email us at info@pipeliningsupply.com.

Read More →

Tip: Expense and Revenue

Tip: Expense and Revenue

When we’re new to technology, we tend to take every job that comes along. More than one has failed to tackle a job that everyone else has turned down as too difficult or impossible to complete. If the expenses to get it down are more than the revenue, you are ahead by turning down the […]

Read More →

Top