renssi
Scale Build-Up
“I got one of your Renssi high speed cable machines, along with your Quik-Coating unit for coating after cleaning. My problem comes when I use the cable machine – the scale accumulates after I start chain knocking and it plugs the line. How can I overcome this without pulling up the cable machine and inserting […]
Fixing an Emergency
“ I was inverting a liner and noticed a hole in the coating that was leaking out resin before I got the liner in the pipe. I was panicking and made a quick decision to put a piece of duct tape over the hole so it would hold air pressure and allow me to invert […]
Cameras for High-Speed Cables
For those of you using high speed cables – whether they are attached to your drills or whether they are in one of the cable machines similar to our Renssi units shown here – we have a solution to watch your tools work in real time without attaching your stiff camera cable to the sheathing […]
Tip: “Gapping Method”
For those of you employing the “gapping method” of preparing a pull in place liner by cutting out holes where the branch lines tie in, then wetting it out and pulling or pushing it into place – here’s a cheaper and much faster method. If you pull the wetted-out liner into place without cutting out […]
Tip: Using a High-Speed Cable
Tip: When using a high-speed cable, cover any exposed metal cable with short sections of the sheathing. This will help prevent the cable from kinking when it gets locked up in a root. For more information contact Pipe Lining Supply at +1-888-354-6464 or email us at info@pipeliningsupply.com.
Video Glasses for More Than Coating
“I wanted to pass on using the video glasses you sell with your coating machine for other applications. I took the glasses and plugged them into my camera, then attached my camera head to the Renssi high-speed cable machine I got from you and used it to clean pipe. It really worked well. I now […]
CIPP Liner Overshot Fixes
“I shot a liner too long and it ended up 4” in the sewer main in the street. I figured it would be okay as it bulged out when it got to the main being unstrained by the host pipe and thought ‘great, I’m insuring no roots from growing into the joint where it connects […]
Connect