Uncategorized

Certification/Demo Class

Certification/Demo Class

Pipe Lining Supply is pleased to offer a Certification/Demo Class on Oct. 1, in Anaheim, California.  Register NOW to reserve your spot! https://pipeliningsupply.com/registration/

Read More →

Trouble Shooting

Trouble Shooting

Best Practices – 11th in the Series Trouble Shooting– CIPP Lining Lining & Calibration Material HOLE IN LINING OR CALIBRATION MATERIAL Patch materials include Tear-Aid ™ product to cover the hole or welding on a patch. The product contains an adhesive in two versions. One for PVC coatings and one for all other plastic coatings. […]

Read More →

Curing the Liner

Curing the Liner

Best Practices – 10th in the Series Ambient & Heat Cure When it’s time to cure the CIPP liner we have 3 methods that are proven and tested and a 4th one that is emerging. We will explore the ambient and heat cure methods. With any of these systems, we want to stretch the liner […]

Read More →

Certification/Demo Class

Certification/Demo Class

Pipe Lining Supply is pleased to offer a Certification/Demo Class on Oct. 10, in Cold Spring, NY.  Register NOW to reserve your spot! https://pipeliningsupply.com/registration/

Read More →

Installing the Liner & Calibration Tube

Installing the Liner & Calibration Tube

Best Practices – 9th in the series Our next best practice is the method of getting the liner into the host pipe that we are using as a form for the new pipe. Remember we are calculating a design thickness that will serve as a stand-alone pipe, so the condition of the host pipe is […]

Read More →

Wet-Out & Calibration

Wet-Out & Calibration

Best Practices – 8th in the series This section will cover the choice of resin, measuring, mixing and “wet-out” of the calibration tube. We have three resin choices, Polyester, Vinyl Ester and Epoxy resin. While all three resins are acceptable for use according to ASTM F-1216 or ASTM F-1743, local agency codes may dictate which […]

Read More →

CIPP Installation – Preparation of Liner, Calibration Tube,  & Pull Strap

CIPP Installation – Preparation of Liner, Calibration Tube, & Pull Strap

Best Practices – 7th in the series This step picks up where we left off with our CCTV cable “storyboard” to prepare the liner. Here are the steps to measure, mark and cut your tube. Layout the CCTV camera Unroll and stretch the liner tube and place beside your CCTV cable On the camera end, […]

Read More →

Job Information File

Job Information File

Best Practices – 6th in the Series Information For All People Involved In The Job Preparing for a CIPP job requires planning. In the planning of the job, there is usually a “hand-off” of information from the tech that sold the job to the crew performing the work. The information transfer should include: Customer Name […]

Read More →

Job Documentation

Job Documentation

Best Practice – 5th in the Series No matter what service you perform for your customers, documenting the work as well as the conditions pre and post job are important for yourself and your customers. Before starting your work it’s a good practice to photo your workspace and any areas you will be gaining access […]

Read More →

High Speed Cable Drain Cleaning

High Speed Cable Drain Cleaning

Best Practices – 4th in the Series We’ve been exploring best practices for our industry. A new tool has come into play within the past few years that accelerates the drain cleaning task when a clog is encountered that stops the drains from working. The advent of the high-speed cabling equipment was born out of […]

Read More →

Top