quik-coating

Exploring The Pipe Lining Supply Compact Lining & Coating Vehicle

Exploring The Pipe Lining Supply Compact Lining & Coating Vehicle

“We saw the Ford Transit Van decked out with drain cleaning equipment, CIPP lining equipment and AIPPR Quik Coating DWV pipe rehabilitation. We walked through the unit and it looked great but didn’t get any pictures or specs. Can you provide detail of the unit with some more pictures?” We are building this vehicle to […]

Read More →

IAPMO Ban of CIPP In Cast Iron Pipe

IAPMO Ban of CIPP In Cast Iron Pipe

I attended the annual code committee meeting in Denver, CO this week (April 29-30, 2019). Our industry, CIPP lining, has been under attack by the Cast Iron Pipe Industry. They were successful in outlawing the use of CIPP in cast iron pipe last year and the contractors and suppliers have joined forces to convince IAPMO […]

Read More →

How Do I Keep My Coating Brushes Clean?

How Do I Keep My Coating Brushes Clean?

“I’ve begun using your coating process but am having a hard time keeping my brushes clean. After each coat I’ve dipped the brushes in the Acetone and then the brush cleaner but am seeing a build up of resin on the brushes. I spray the brushes once at the beginning of my first run and […]

Read More →

We PASSED the TEST!

We PASSED the TEST!

Our coating method has been tested and approved!! Here’s our independent test results for our coating process that conforms to ICC standard PMG-1485, and IAPMO IGC-351-18a. The results verify our claim of passing all testing methods as specified by each standard. Please review the documentation and contact us with any questions or concerns you may […]

Read More →

Quik-Coating Maintenance

Quik-Coating Maintenance

“We love the coating equipment and the process except for one issue. When the unit sets for a few days, the A side pump is frozen and won’t pump. What’s going on here?” Every piece of equipment needs maintenance. Let’s take your car. You hop in, turn the key, shift it into gear and away […]

Read More →

CIPP Solutions for Tie-Ins

CIPP Solutions for Tie-Ins

Many of you perform work inside buildings where many branch lines have tied in to a line your were lining with CIPP materials we supplied you. This past year we introduced the Quik-Coating Process which allows you to coat Drain, Waste and Vent (DWV) piping without the worry of opening branch lines or having opened […]

Read More →

Quik-Coating Presentation at WWETT Show…

Quik-Coating Presentation at WWETT Show…

For those of you still evaluating coating of drain, waste and vent (DWV) piping as well as other conduits, John Heisler from Pipe Lining Supply will present information on the coating process. The presentation will include the methods of application used for the process, the tooling needed to apply the product, some case histories, and […]

Read More →

Poly Urea Coating Process – IT WORKS!

Poly Urea Coating Process – IT WORKS!

“You haven’t talked about the coating process lately. Any problems with the process we need to know about? I’ve heard that some of the processes are too time consuming to make any production levels feasible.” There are several competitive processes out in the market place that use a variety of resins and are applied with […]

Read More →

2018 Year in REVIEW

2018 Year in REVIEW

Pipe Lining Supply has had quite a year and wanted to share some of the milestones we’ve made to help the rehabilitation of DWV & Sewers even easier than ever for our contractor customers. Quik-Coating System NextGen Lateral Lining Material Yellow Calibration Tube Nozzle Improvements for the Quik-Shot Two Brushes are Better than ONE! Resin […]

Read More →

Quik-Coating Resin Mixing

Quik-Coating Resin Mixing

“A competitor told me that your coating system can’t work as it does not employ a static mixer to mix the 2 parts of resin. He also said there would be no reason to weigh the resin before application and after as the resin is pre-mixed before applying. Do you have an answer or is […]

Read More →

Top